1.2T Welding Positioner Pipe Welding Flange Welding
Welding positioner normally composed by worktable slewing mechanism
and turnover mechanism, which let the work piece that fixed on the
worktable in the desired welding or fitting angle by worktable's
lifting, turnover and slewing. And the worktable's slewing is
frequency inverter stepless speed regulation to achieve the
satisfactory welding speed.
The welding positioner series are side tipping type, head and tail
rotation type, head and tail lifting rotation type, head and tail
inclined type and double rotation type, etc.
It's can match with welding manipulator to form into automatic
special welding machine, and it's also match with robot peripheral
equipment and robot to realize welding automation. And we also can
make customized welding positioner according to clients' different
work piece and technological requirements.
MAIN TECHNICAL PARAMETERS:
| MODEL | HBJ12 |
| QUANTITY | 1 SET |
| RATING CAPACITY, ton | 1.2 |
| WORKTABLE DIAMETER, mm | Φ1200 |
| TILTING CENTER HEIGHT | 900 |
| ROTATION SPEED, r/min | 0.05~0.5 |
| ROTATION SPEED CONTROL | STEPLESS VARIABLE FREQUENCY CONTROL WITH AC INVERTER |
| ROTATION MOTOR POWER, kw | 0.75 |
| TILTING ANGLE, ° | 0~90 |
| TILTING MOTOR POWER, kw | 1.1 |
| TILTING SPEED, r/min | 0.4 |
| MAX ECCENTRICITY, mm | 200 |
| MAX GRAVITY CENTER, mm | 250 |
| REMOTE CONTROL PENDENT | YES |
| FOOT SWITCH | YES |
PACKING FOR SEA TRANSPORT WITH WOODEN CASE
HBJ12 TYPE WELDING POSITIONER IS MAINLY COMPOSED OF WORKTABLE
ROTATION AND TILTING UNIT. BY MEANS OF WORKTABLE TITING AND
ROTATION, WORK-PIECE FIXED ON THE WORKTABLE CAN BE PLACED TO IDEAL
POSITION FOR WELDING AND ASSEMBLY. THE TURNING DEVICE IS MAINLY
USED TO DRIVE ROTARY MOVEMENT OF WORKPIECE DONE BY AC MOTOR TO
DRIVE WORM REDUCER. THE OUTPUT PINION OF WORM GEAR REDUCER IS MESHE
WITH THE SLEWING BEARING TO ROTATE. THE SLEWING BEARING ASSOCIATED
WITH THE WORKTABLE TO BRING ALONG WORKTABLE ROTATION. SPEED OF
WORKTABLE ROTATION IS CONTROLLED BY INVERTER, ATTAINING
SATISFACTORY WELDING SPEED. IT IS OPTIONALLY EQUIPPED WITH
FOOTSWITCH TO CONTROL THE ROTATION DIRECTION OF WORKTABLE. THE
TILTING OF THE POSITIONER USES A MOTOR TO DRIVE TWIN-STAGE WORM
REDUCER WHOSE OUTPUT PINION MESHING WITH SECTOR GEAR TO ACHIEVE.
THE PINION WHICH DRIVES THE SECTOR GEAR IS FITTED ON THE LONG
SHAFT. FLEXIBLE DRIVE CAN RESIST THE MOMENT FIBRILLATION OR
OVER-LOAD, IN ORDER TO PROTECT MOTOR AND REDUCER INJURY FROM THE
IMPACT LOAD. THE ELECTRIC CONTROL SYSTEM CONSISTS OF THE ELECTRIC
CONTROL BOX AND REMOTE CONTROL PENDENT. THE MAINLY ELECTRIC ORGANS
ARE FROM SIEMENS WHICH ARE RELIABLE PERFORMANCE. THE INVERTER USES
YASKAWA SYSTEM, WHICH HAS THE CHARACTERISTICS OF LOW-NOISE,
HIGH-PRECISION DIGITAL DISPLAY, OVERALL STABILITY OF HIGHT
ANTI-JAMMING CAPABILITY.
